Informa Exhibitions Ltd regrets to announce the closure of Solids & Bulk Handling magazine.

Solids & Bulk Handling magazine has been affected by the ongoing downward trend of on-the-page marketing spend. This combined with the economic pressures that the loose and solids handling industry face has ultimately led to the sad and difficult decision to cease publishing the magazine.

The November/December 2017 issue of Solids & Bulk Handling will be its last edition.

Trantec

ADB Bearing Sensor Tester May 22, 2013

ADB Bearing Sensor Tester

The ADB Sensor Tester has been designed to test 4B adjustable depth bearing (ADB) temperature sensors in the field.  This hand held test unit features an integrated heating block specifically designed to have a 4B ADB sensor directly inserted.  With integral controls and temperature display, the unit heats the sensor to the desired trip point, and allows quick and easy real life testing of the sensor and temperature monitoring system.

During planned maintenance or periodic testing, the ADB Sensor Tester can be used as a diagnostic tool to verify the alarm and shutdown sequences of the control unit are functioning as expected.  To test, the heater block should be set above the control units alarm operating temperature.  Remove the ADB bearing sensor probe from the housing and insert it into the heater block.  As the heater block reaches the alarm temperature, the ADB sensor will relay this data to the control unit, allowing you to verify that the alarm and shutdown sequences run as expected.



Article Images Click an image to enlarge